Visible Light Communication in Vehicular Communication Applications

This paper addresses the issues related to the Visible Light Communication (VLC) usage in vehicular communication applications. We propose a Visible Light Communication system based on Vehicle-to-Vehicle, Vehicleto-Infrastructure and Infrastructure-to-Vehicle communications able to safely manage vehicles crossing through an intersection. By using the streetlamps, street lights and traffic signaling to broadcast information, the connected vehicles interact with one another and with the infrastructure. Using joint transmission, mobile optical receivers collect data, calculate their location for positioning and, concomitantly, read the transmitted data from each transmitter. As receivers and decoders, optical sensors with light filtering properties, are used. Bidirectional communication between the infrastructure and the vehicles is tested. To command the passage of vehicles safely queue/request/response mechanisms and temporal/space relative pose concepts are used. The results show that the innovative solutions for congested intersections are related to the introduction of split intersections. The results indicate that the V-VLC system increases safety by directly monitoring critical points such as queue formation and dissipation, relative speed thresholds, as well as inter-vehicle spacing.publishersversionpublishe

VLC Based Guidance System to Be Used by Mobile Users Inside Large Buildings

The main goal of this paper is a Visible Light Communication (VLC) based guidance system to be used by mobile users inside large buildings. This system is composed of several transmitters (ceiling luminaries), which transmit map information and path guidance messages. Mobile devices, with VLC support, decode the information. A mesh cellular hybrid structure is proposed. The luminaires, via VLC, deliver their geographic position and specific information to the users, making them available for whatever use they request. The communication protocol, coding/decoding techniques, and error control are examined. Bidirectional communication is implemented and the best route to navigate through venue calculated. We propose several guidance services and multi-person cooperative localization. By analyzing the results, it became clear that the system not only provides self-location, but also the capability to determine the direction of travel and to interact with information received in order to optimize the route towards a static or dynamic destination.publishersversionpublishe

Interacting Microsoft Visual Basic Procedures (Macros) and GIS tools in order to access optimal location and maximum use of railways and railway infrastructures

Some parts of the Portuguese railway infrastructure have been neglected through time: Rural lines have been abandoned, investment in new infrastructure is sometimes delayed, and marketing strategies to keep or attract more users have not been pursued. Simultaneously, problems with urban congestion, pollution and mobility for the young, the elderly, the poor, and the handicapped are putting forward the discussion about new or more sustainable modes of transportation. Common sense of public officials, other lobbying groups, and the locals demand new, trendy train lines. And while some axes may have the potential to justify rail lines, others seem to lack population or funding to be enabled. One major problem in order to evaluate the worthiness of these rail projects has been the fact that very often the studies of travel demand and physical implantation are done separately. Travel demand analysis is done based on the four-step model (trip generation, distribution, modal split, and network assignment) using survey data and the network system, using a relatively wide zoning. The importance of interacting with other, finer, information (i.e. slope, density of population, environmental sensitivity, or other socio-economic and land use information) with the development of the travel analysis demand will enhance the analysis/results and increase the chance of proposing lines that are both optimal in location and will have the maximum use by the citizens. Off the shelf software is still unable to perform this kind of operations. Some perform the analysis using existing networks, and no information on the land is available besides the zoning system, other software propose lines accordingly to land slopes, but no trip information is included. GIS packages have the capacity to include the land information and some have some transportation analysis, but are lacking computation capabilities and algorithms to perform analysis similar to off-the-shelf transportation software. In order to develop this kind of integrated analysis it is important to have a good knowledge of the algorithms and analysis required by transportation and of the tools/opportunities offered by the GIS packages. This paper presents a methodology that integrates the transportation algorithms with the GIS functionalities, using excel macro-language. The result is an interaction of both travel demand analysis and site selection. The characteristics of the place constrain the travel demand analysis, but on its own the travel demand analysis define not only the buffer of the train line, but systematically enhance the shape of the line and the location of the stops each time the results of a phase of the travel demand analysis is outputted. This paper offers guidelines for those developing travel demand analysis including some site selection criteria, and it can be a starting point for those of whom intend to develop further application of in the GIS fields.

Photodetector with integrated optical thin film filters

This paper reports on optical filters based on a-SiC:H tandem pi'n/pin heterostructures. The spectral sensitivity is analyzed. Steady state optical bias with different wavelengths are applied from each front and back sides and the photocurrent is measured. Results show that it is possible to control the sensitivity of the device and to tune a specific wavelength range by combining radiations with complementary light penetration depths. The transfer characteristics effects due to changes in the front and back optical bias wavelength are discussed. Depending on the wavelength of the external background and irradiation side, the device acts either as a short- or a long-pass band filter or as a band-stop filter. The output waveform presents a nonlinear amplitude-dependent response to the wavelengths of the input channels

Effect of repeated use on topographical features of protaper next endodontic rotary file

Background: The purpose of this study was to evaluate themorphological alterations of the ProTaper next rotary file (PTN)under scanning electron microscopy (SEM).Materials and Methods: A total of 18 simulated root canals wereallocated to three groups. Six new sets of PTN instruments were used3 times. A #10 K-file was inserted into the working length, followedby ProGlider to create a glide path. Ensuring the manufacturersinstructions with 99% ethyl alcohol for irrigation, all canals wereprepared. Files were photographed in the same position before andafter three canals preparations using a high-resolution SEM.Result: A metal strip appeared on one X1 instrument surfacepreoperatively. Microcrack defects were observed on two X2 filespostoperatively, and the blunt cutting edge was observed on threeX1 files before and after use and one file fractured.Conclusion: Small number of changes appeared on PTN surfaces,yet same PTN file can be used safely 3 times to prepare multi-rootedteeth within the same patient

Do different sites in the same river have similar Trichoptera assemblages?

During the summer of 2001, trichoptera larvae were sampled with a kick-net in 15 sites belonging to 3 rivers of the Mondego River basin, in central-north Portugal. Simultaneously, 42 environmental variables were evaluated for each site. Twenty five species and genera of caddisflies were identified. The objective was to assess if trichoptera assemblages within a river tended to be more similar among each other than between rivers, giving the physical continuity of the habitat. Localities showed low segregation between all samples (MDS, CLUSTER and ANOSIM). The Alva River samples had the higher number of taxa and animals while the Ceira River samples had the lowest values. In terms of environmental characteristics, PCA showed high similarities between samples of the same river. However there was not total segregation of rivers. BIOENV analysis identified the set of parameters that best explain trichopteran associations per river. For the rivers, these variables were all related to habitat (e.g. pool quality, depth, substrate quality). The differences between the Alva and Ceira rivers seem to be related to the deterioration of the water quality in the Ceira river (increasing levels of sulphate, chloride and % of industrial, urban and degraded areas), which increased down the river.Durante el verano de 2001 se capturaron larvas de tricópteros en 15 puntos de muestreo pertenecientes a 3 ríos de la cuenca hidrográfica del Mondego, en el centro-norte de Portugal. Los muestreos fueron realizados con una red de mano (tipo "kicknet") y, simultáneamente, se evaluaron 42 variables ambientales para cada localidad. En total fueron identificadas 25 especies de tricópteros. El objetivo del estudio era evaluar si, dada la continuidad físico-química del habitat, las asociaciones de tricópteros de las localidades situadas en un mismo río son más semejantes entre sí que las pertenecientes a localidades de ríos diferentes. Los locales se presentaran poco segregados de acuerdo con los análisis MDS, CLUSTER y ANOSIM. Las muestras del río Alva tuvieron un número más elevado de taxa y animales mientras que las muestras del río Ceira tuvieron los valores más bajos. Desde el punto de vista ambiental el PCA reveló que las muestras de un mismo río eran más semejantes entre si. Sin embargo, no hubo segregación completa de ríos. El análisis BIOENV identificó el grupo de parámetros que mejor explican las asociaciones de tricópteros por río. Para los ríos, esas variables estaban todas relacionadas con el hábitat (e.g., calidad de las zonas lénticas, calidad de substrato y profundidad). Las diferencias entre los ríos Alva y Ceira parecen ser debidas al empeoramiento de la calidad de las aguas del río Ceira (mayores niveles de sulfato, cloro y porcentaje de degradación industrial y urbana) que aumentan río abajo

Enhancement of Escherichia coli and Staphylococcus aureus antibiotic susceptibility using sesquiterpenoids

The present work examines the potential of sesquiterpenoids to sensitize Escherichia coli and Staphylococcus aureus, and modulate their susceptibility to the standard antibiotics ciprofloxacin, erythromycin, gentamicin and vancomycin. It was tested samples of three sesquiterpenoids: guaiazulene, nerolidol (racemic mixture of the cis and trans isomers) and germacrene D enriched natural extract. Experiments were conducted aiming to assess the antimicrobial effects of the antibiotic-sesquiterpenoid combination on bacterial growth inhibition, by the disc diffusion assay and the minimum inhibitory concentration (MIC) assessment, the bactericidal effects, the post-antibiotic effect (PAE) and the effect on membrane permeability. The data related with the antimicrobial activity evidenced, through the disc diffusion assay, an antibiotic S. aureus antimicrobial activity enhancement by sesquiterpenoids presence. The MIC value for E. coli decreased significantly by sesquiterpenoids combination with ciprofloxacin, erythromycin and gentamicin, and for S. aureus, with all four selected antibiotics. This combination also increased the PAE, with the exception of guaiazulene, which seemed to quench antibiotic antimicrobial action. A moderate correlation between antimicrobial action and impairment of cell membrane function was detected for germacrene D enriched extract, and nerolidol, as single treatments and in combination with antibiotic, while a poor correlation was obtained for guaiazulene. This study provides basis for the evaluation of sesquiterpenoids as alternative or possible synergistic compounds for current antimicrobial chemotherapeutics, showing the practical utility of natural derived products to increase the susceptibility of E. coli and S. aureus.The authors acknowledge the financial support provided by the Portuguese Foundation for Science and Technology (Project CHEMBIO-POCI/BIO/61872/2004, CIENCIA2007 - Manuel Simoes

Evidences of exopolysaccharide production by Helicobacter pylori submitted to hydrodynamic stress

Helicobacter pylori is a widespread Gram-negative bacterium that infects the stomach of humans leading to the onset of several gastric disorders, such as gastritis, gastric ulcers, and cancers. The transmission of H. pylori remains unclear but two different pathways have been suggested: faecal-oral and oraloral. It has been reported that H. pylori has the ability to incorporate in biofilms formed on water-exposed surfaces thus providing a route of infection. On the other hand, a polysaccharide-containing biofilm has been observed at the air-liquid interface when H. pylori is grown in a glass fermenter1. Because exopolysaccharides (EPS) play a determinant role in bacterial adhesion by conferring protection against adverse conditions such as starvation and environmental aggressions, EPS production would be expected to be higher if the bacterium is exposed to water. In this work the capability of H. pylori to produce EPS when exposed to water and under hydrodynamic stress has been evaluated. H. pylori was inoculated in autoclaved distilled water and allowed to stand under gentle stirring at room temperature. The significant and continuous increase in the sugar content 192 hours after inoculation suggests the production of exopolysaccharides. This evidence is reinforced by epiflourescence microscopical observation of the bacteria stained with DAPI (4,6-diamidino-2-phenylindole) that revealed the presence of bacterial aggregates 318 hours after inoculation

Perfil compósito para colector solar, respectivo método de produção e utilização

A presente invenção diz respeito a um perfil compósito para caixa modular utilizada em colectores solares para aquecimento de águas para uso doméstico ou industrial cujas principais vantagens passam pela: produção através de um processo de extrusão, redução das perdas energéticas do colector solar devido ao design com perfil alveolar, fácil portabilidade devido a redução do peso por metro quadrado de painel, utilização de compósitos recicláveis na sua composição usando entre outros: borracha de pneu usado reciclada, redução dos tempos de montagem dos colectores solares, eliminação da necessidade de colocação de isolantes adicionais à caixa modular e redução dos custos de produção

Portuguese 16th to Early 18th Century tin Glazed Ceramics Found at the Tagus Estuary Saltpans

UID/NAN/50024/2019 M-ERA-MNT/0002/2015 UIDB/04209/2020 UIDP/04209/2020Salt was extracted from saltpans, in the South shore of Tagus River by evaporation of the salted sea water which penetrates into the estuary. The walls and the bottom of those saltpans were made of local clays to retain the sea water, and ceramic sherds have been used to endure those walls and also to allow people to walk on the saltpans’ walls. Those sherds constitute an example of the ceramics production in Lisbon workshops, starting in the mid-16th century and reaching high levels of quality in the 17th and 18th century. A detailed archaeometric study of 14 selected sherds dated from the 16th to the early 18th century has been made and the conjugation of the information provided by the micro-Raman, XRD and XRF experiments for those sherds and clays collected locally, allowed us the characterisation of the Lisbon ceramics in that period. Three main groups could be identified in the ceramic bodies; all made with locally collected clays of Miocene origin. In the first group, the potters used raw materials from the clay sources located at Santa Catarina area in Lisbon, most probably mixed with Lapa clays, which were fired at a high temperatures, ranging from 850ºC to 950ºC. Gehlenite and quartz are the dominant minerals of these ceramic bodies. In the second and third groups of Lisbon ceramic bodies, made with Prazeres clays, diopside was also detected but with variable amounts of gehlenite. Clay formations mineralogy mainly include kaolinite, muscovite/illite, quartz, calcite, and feldspars (albite and microcline).publishersversionpublishe